iTero Scanner & AI X-Rays: Why We Check Twice
Here’s something I’ll happily admit to you as your dentist: my memory is not a reliable diagnostic tool. As I put it to patients, “as a dentist that sees thousands of patients a year, you can’t really rely on my brain to monitor that little tiny bit of wear.”
That’s exactly why, at Smile Hub, we use an iTero scanner on every patient at every check-up, back it up with x-rays, and let software take a second look at what I’ve found. Not to replace clinical judgement — mine still makes the calls — but to catch the small things a human eye can miss on a busy day. Let me explain how it works and why it matters to you.
“We’ll keep an eye on it” is a promise memory can’t keep
Every patient has heard a dentist say “we’ll just keep an eye on that.” It sounds reassuring. The problem is that it relies on a human remembering, months or years later, exactly how worn or how deep something looked last time.
I see thousands of patients a year. I’m not going to accurately hold in my head the precise state of one tiny area of wear on one tooth and reliably judge whether it’s crept worse since your last visit. Nobody could. So instead of relying on memory, we rely on a record.
The scan, compared year on year
When we scan your teeth with the iTero Lumina, we capture a detailed 3D record of your mouth. At your next visit, we scan again — and the software compares the two.
If something has changed, it’s the software that flags it, highlighting the discrepancy in red. That takes the subjectivity out of it. It’s not me squinting and saying “hmm, this looks a bit worse than last time.” It’s an objective comparison telling us that a year ago this area wasn’t this worn, and now it is — and that it might be time to act.
“The software is telling us that a year ago this wasn’t this worn down, and now it is.”
That means we intervene based on evidence of actual change, not on a hunch, and usually while a problem is still small.
AI on the x-rays: a second opinion, not the last word
We also use AI as an extra check on x-rays, through the scanner’s Align technology. I want to be precise about what this does, because it matters.
I’m human. As I tell patients: “you might be having an off day… I’m only a human at the end of the day.” You’ve been looking at x-rays all day, and occasionally your eye simply won’t settle on a small detail. The AI acts as a second set of eyes, flagging small lesions for me to review, so that something subtle is less likely to slip past.
Crucially, the AI supports my diagnosis — it doesn’t make it. I review everything it flags, apply clinical judgement, and decide with you what’s worth watching and what’s worth treating. It’s a safety net, not an autopilot.
There’s a side benefit patients really value here, too:
“It’s not like, oh, is this dentist trying to upsell me? It’s like, look, the software has detected this.”
When you can see on screen that a piece of software independently flagged something, the conversation is no longer about whether you trust me; it’s about what we do next. That’s a much better place to start.
The metal filling problem
X-rays are brilliant, but they have a genuine limitation, and I’m honest with patients about it. As I explain in the chair, looking at an old metal filling: “I can’t see through that metal filling. All I’m getting is a 2D image of a 3D space.”
Decay can begin underneath or alongside an old metal filling and stay hidden — sometimes with no symptoms at all — until it’s gone deep enough to show as a shadow on the x-ray. By then it’s a bigger job than it needed to be. Knowing where x-rays can and can’t see is part of why we combine imaging, scanning and careful clinical examination rather than leaning on any single tool.
Tracking shade on two teeth, every visit
One more thing we track that patients don’t expect: tooth colour. At every check-up we record the shade of two teeth — an incisor and a canine — because they’re naturally quite different colours, so together they give us a useful baseline.
Why bother? Because a change in shade can be an early signal. Is a tooth gradually darkening because it’s dying? Is staining creeping in from more coffee or red wine? Catching those subtle, incremental changes early means we can talk about simple solutions before they become bigger concerns.
What you leave with
Everything we find gets pulled together for you. I bring the scans and x-rays up on the screen, take screenshots of anything relevant, and annotate them — noting where there’s early decay, what’s worth simply monitoring, and what might be worth treating.
That all goes into a report you take home. At the end of your appointment you scan a QR code and the full PDF downloads to your phone: photos of your teeth, the annotations, the lot. Even if everything’s healthy and you need nothing done, you walk away with something tangible — a clear record of what’s going on in your mouth, and the knowledge to go with it.
What to do next
If it’s been a while since anyone did more than glance in your mouth, a thorough, technology-led examination will tell you where you actually stand — not just what’s broken, but what’s healthy.
Book a new patient exam and see your own teeth the way we see them.
Frequently asked questions
What is an iTero scanner and is it uncomfortable?
The iTero Lumina is a handheld 3D scanner that builds a detailed digital model of your teeth using a small camera — no messy impression trays, no goo. It’s simply passed around your teeth and is comfortable for the vast majority of people, including those who dislike traditional moulds.
Can a scan or x-ray detect decay under a filling?
X-rays can reveal decay around and sometimes beneath fillings, but metal fillings block the view — an x-ray is only a 2D image of a 3D space, so decay hidden directly under metal may not show until it’s deeper. That’s why we combine x-rays, scanning, AI-assisted review and hands-on examination rather than relying on any one method.
Does AI decide whether I need a filling?
No. The AI flags possible areas of concern on your x-rays as a second check, but every diagnosis and treatment decision is made by your dentist using clinical judgement, and discussed with you. Think of it as a safety net that helps make sure nothing subtle is overlooked.
How often should I have a dental scan?
We scan at each check-up so we can compare over time and spot small changes early. How frequently you’re seen overall depends on your individual needs, which your dentist will discuss with you at your exam.
Related treatments at Smile Hub: oral health screening.

